PRODUCT: Aluminum Louvered Continuous Soffit Vent
ITEM ID: VLCA
Provides a continuous under soffit air flow to provide superior ventilation
ITEM ID | "A" | "FINISH" | NFA* |
---|---|---|---|
VLCA2 | 2-1/2" | MILL | 9 |
VLCA2-BR | 2-1/2" | BROWN | 9 |
VLCA2-WH | 2-1/2" | WHITE | 9 |
All parts are 8’ Length standard unless otherwise indicated *NFA =net free area / sq.in.per linear ft.
MATERIALS: 3105-type aluminum sheet with a minimum tensile strength of 29,000 psi, or equivalent, as referenced in AAMA 1482-86 (paragraph 3.2.3). The metal shall be treated on both sides with a non-chromate chemical conversion coating to ensure excellent paint adhesion and resistance to corrosion.
FINISHES: Stocked in mill finish, white, and brown.
APPLICATION CONSIDERATIONS: Direct contact of aluminum product(s) with certain dissimilar materials or contact with the water run-off from such materials is likely to result in corrosion, which is not covered by the product warranty. Therefore, care should be exercised to avoid contact of aluminum with any corrosive materials during installation including, but not limited to: pretreated lumber, concrete, masonry cement, stucco, salt, corrosive chemicals, dissimilar metals (copper, zinc, steel, etc.).