Wall Ties

Masonry Products

CORRUGATED BRICK (WALL) TIES

US (Patent Pending)

US Trademark # 3,196,848

DESIGN FEATURES: Ties Masonry to wall studs

PACKAGING: Corrugated wall ties available in two ways; Stackpack® pioneered by Tamlyn (lined up tightly in box) or bulk (loose in box). Suppliers can sell stackpack by the sleeve or even by the piece count (250 or 500) and store 5 pallets on top of each other

WARNING: Repeated bending of steel is unnecessary, will weaken the strength of the product, may create fracture at the bend line, and is considered an abuse of the product, voiding any performance warranty. Fractured steel will not perform as designed and should be discarded immediately. Only one bend of the product to the desired 90° form should be required

MATERIAL: 22 ga. and 28 ga. Galvanized Steel. Also available in hot dip galvanized after fabrication (in accordance with ASTM A153 B3) and stainless steel (type 3042B) for optimal corrosion resistance. Stainless steel is absolutely best material for longevity; field studies show regular galvanized wall ties can deteriorate and fail within 10years. Be certain compatible fasteners are used (e.g., stainless steel nails with stainless steel nails with stainless steel wall ties). Painted steel over galvanized is acceptable and actually superior

SAMPLE SPECIFICATION: Tamlyn BT22SP 22GA Stackpack® Brick Ties 500/Box

ADJUSTABLE SCREW-ON VENEER WALL TIES

DESIGN FEATURES: Commercial adjustable masonry veneer anchor ties veneer to steel studs. Has reinforced deformations and 1/4" holes

MATERIAL: 12 ga. galvanized steel

TRIANGLE TIES

DESIGN FEATURES: Ties veneer anchor to masonry. Hot dipped available (special order with 1.50 oz zinc coating)

MATERIAL: 3/16" galvanized steel wire

DOVETAIL TRIANGLE TIES

DESIGN FEATURES: Ties masonry walls to concrete with anchor slot installed

MATERIAL: 12 ga. galvanized steel and 3/16" galvanized steel wire

TERMITE SHIELDS

DESIGN FEATURES: Versatile pan has many possible contractor/home uses, including termite shield, pier cap, vaporizer pan, pot holder, oil drain pan, AC condensation drip pan in attic or to hold runoff while stripping furniture, etc

Termite Shield doesn't totally eliminate termite infestation, but forces them to build easily visible channels

Now provided with notched corners for improved safety

MATERIAL:

Option 1 - 30ga Galvanized steel pan not recommend for usage with ACQ Lumber (Recommend install felt between ACQ lumber and shield)

Option 2 - Vinyl Coated™ 30ga. galvanized steel recommend for usage with ACQ Lumber