|
U-Type Hangers for Wood I-Joist |
|
JOIST HANGERS DESIGN FEATURES: constant dimensional accuracy and precision controlled 90° angles ensure proper wood I-joist bearing (flat seat) and header connection and alignment. Two design styles are available for application and load bearing flexibility Stock No. Design Configuration S/SI ( ) - Standard H ( ) - Standard H ( ) R - Reversed face flange (turned in) for 2-9/16" NET and larger joist sizes MUI ( ) - Standard MUI ( ) R - Reversed face flange (turned in) for 2-9/16" NET and larger joist sizes WOOD I-JOIST SIZES: Single: 2 series (2x) W = 1-9/16" 25 series W = 1-13/16" 35 series W = 2-3/8" 3 series (3x) W = 2-9/16" 4 series (4x) W = 3-9/16" Double: 2 series (2x) W = 3-1/8" 25 series W = 3-9/16" 35 series W = 4-13/16" 3 series (3x) W = 5-1/8" 4 series (4x) W = 7-1/8" MATERIAL: 16 ga. and 14 ga. galvanized steel meets the specifications for schools and other public buildings.. SI series and 25 series - 18 ga. galvanized steel LOADS: nailing schedule and design load capabilities are consistent with those obtained in independent laboratory tests DESIGN FEATURES: MUI hangers are designed for high loaded commercial I-joist applications without web stiffeners that are usually required. There are optional joist nails for a total uplift load of 720 lbs. using 1-1/2" 10d nails SPECIAL: modified H hangers can be obtained with one flange turned inside, with both flanges in the same directions as the joist side, or with one flange bent and one flange unbent for asymmetrical designs. Specify rights and lefts NOTE: web stiffeners and backing blocks may not always be required. Consult the engineered wood I-joist manufacturer for web stiffener and backing block requirements, and recommended nailing schedule for each. IMPORTANT: Design loads are for joist hangers. They are NOT wood I-joist load values (see the Design Load Product catalog of the engineered wood I-joist manufacturer) |
|
Tamlyn Partners Premium Products for Professionals |
|
© Copyright 2008 |
