|
Post Anchors |
|
POST ANCHORS DESIGN FEATURES: when placed into wet concrete (after screeding), these post base anchors provide both lateral and uplift resistance - they will not pull out due to offset legs. Pointed ends provide for fast, easy setting and alignment. They also eliminate the need for bolts or other inserts. The seat is flush-mounted to the concrete. The post anchors are also available in rough post sizes. MATERIAL: 12 ga. galvanized steel * Some products available in G-185 Triple Zinc or Hot-Dip Galvanized. Call for availability. |
|
POST ANCHORS/STAND-OFF DESIGN FEATURES: the PAS44 is very similar to the HAS heavy anchor stand-off (above) except that it can be embedded into concrete slabs, floor or deck 4". The PAS has the same moisture-barrier feature or provides a 1" stand-off plate height. MATERIAL: 12 ga. galvanized steel base 12 ga. galvanized steel strap. INSTALLATION: use 14-16d nails for full load values. For 4x post size, use 2-1/2" x 4-1/2" MB; for 6x post size, use 2-1/2" x 6-1/2" MB * Some products available in G-185 Triple Zinc or Hot-Dip Galvanized. Call for availability. |
|
ALUMINUM POST ANCHOR DESIGN FEATURES: secure square wooden post to slab. Designed for both positive and negative loads. Eliminates dry rot, moisture damage, and splitting/peeling. MATERIAL: custom die-extruded form quality heavy 6063 T-5 extruded aluminum, mill finish |
|
ADJUSTABLE ANCHORS DESIGN FEATURES: provide fully-adjustable post base plus moisture and sanitary protection - also used for new construction or remodeling applications where damp rot is a problem. Bending slot provides greater ease of installation. For an easy adjustment to a previously set 1/2" concrete fastener (or bolt and cement insert), use the slotted hole. Also available in rough post sizes MATERIAL: 18 ga. and 16 ga. galvanized steel with a 14 ga. galvanized stand-off plate. SPECIAL: stand-off plate provides flat-end bearing area for posts and keeps the post end 1-3/16" above the surface moisture * Some products available in G-185 Triple Zinc or Hot-Dip Galvanized. Call for availability. |
|
ADJUSTABLE ANCHORS / ECONOMY DESIGN FEATURES: The AAE44L provides higher uplift capacity because of extended sides with extra bolts and nailing schedules. The AAEL anchors are also available in rough lumber sizes. MATERIAL: 12 ga. galvanized steel with a 12ga. galvanized stand-off plate * Some products available in G-185 Triple Zinc or Hot-Dip Galvanized. Call for availability. |
|
DECK ANCHORS / STAND-OFF DESIGN FEATURES: the DA and GDB eliminates toe-nailing of the post or column to a flat surface. The bottom plate 1/2" bolt hole can be set to concrete with a 1/2" bolt, cement nails or "gun" inserts. The DA is available in rough post sizes. The DAS stand-off is used to lessen post decay at concrete or masonry floors. MATERIAL: DA and GDB 18 ga. galvanized steel; DAS 10 ga. galvanized steel * Some products available in G-185 Triple Zinc or Hot-Dip Galvanized. Call for availability. |
|
Tamlyn Partners Premium Products for Professionals |
|
© Copyright 2008 |
