|
Joist Hangers |
|
SINGLE JOIST HANGERS DESIGN FEATURES: Speed prongs greatly aid installation JOIST SIZES: 2x4 to 2x14 INSTALLATION: Install using all specified nails. If all nail holes provided are not achieve published values. When nailing into treated lumber, to avoid splitting wood pre-drill nail holes approximately 1/16” smaller than the nail diameter MATERIAL: 20ga. galvanized steel * Some products available in G-185 Triple Zinc or Hot-Dip Galvanized. Call for availability |
|
DOUBLE, TRIPLE, QUAD AND CUSTOM JOIST HANGERS DESIGN FEATURES: Speed prongs greatly aid installation JOIST SIZES: Double - (2) 2x4 to (2) 2x14 Triple - (3) 2x10, 12, 14 Quad - (4) 2x10, 12, 14 Custom - 4x8, 10 INSTALLATION: Install using all specified nails. If all nail holes provided are not achieve published values. When nailing into treated lumber, to avoid splitting wood pre-drill nail holes approximately 1/16” smaller than the nail diameter MATERIAL: 18ga. galvanized steel * Some products available in G-185 Triple Zinc or Hot-Dip Galvanized. Call for availability |
|
STANDARD JOIST HANGERS (ROUGH) DESIGN FEATURES: Provide proper balance between load-carrying capacity of hanger and the joist it supports. Hanger configuration changes for heavy-duty S66 and S610. JOIST SIZES: 2xs, 3xs, 4xs, 6xs, double 2xs and triple 2xs, also available on special order for rough beam sizes. To order rough sizes, add R to stock no. (example: SR26). MATERIAL: 16ga. galvanized steel. Meets specifications for schools and public buildings. LOAD: can be increased with the use of 16d nails in header for S24, S26 and S210. See Economy hangers for load specifications. |
|
TRUSS HANGERS DESIGN FEATURES: 5" truss or joist nailing support gives you versatility by allowing usage of small joist heights. Custom sizes (such as 22" and 24" heights) are available based upon your specifications. Extra long straps bend to meet more hanger applications. No bolts required. JOIST SIZES: 2x6 and (2) 2x6 MATERIAL: 18ga. galvanized steel * Some products available in G-185 Triple Zinc or Hot-Dip Galvanized. Call for availability. |
|
LIGHT SLOPED/SKEWED HANGERS DESIGN FEATURES: combination sloped skewed hangers offer further standardization and construction economy. LSS hangers can be used to connect rafters to ridge beams in vaulted roof structures. JOIST SIZES: 2xs, 3xs, 4xs and double 2xs MATERIAL:18ga. and 16ga. galvanized steel LOADS: larger seat-bearing and designed direct nailing provide proper installation of all nails into joist hangers. |
|
STANDARD / MEDIUM SKEWED HANGERS (45°) DESIGN FEATURES: standard and medium skewed hangers are offered to promote further standardization and construction economies. JOIST SIZES: 2xs, 3xs, 4xs and double 2xs MATERIAL: SSL/SSR - 16ga. galvanized steel MSL/MSR - 14ga. galvanized steel LOADS: larger seat-bearing and designed direct nailing provide proper installation of all nails into joist hangers. |
|
Tamlyn Partners Premium Products for Professionals |
|
© Copyright 2008 |
