Single Joist Hangers
Item ID: SJQ24, SJQ26, SJQ28, SJQ210

(SJQ Series) TAMLYN custom-die designed and manufactured for quick installation and maximum load value.


MATERIAL: 20ga. galvanized steel. Available in G-185 Triple Zinc or Hot-Dip Galvanized. Call for availability.
CODES: FL Approval #8283, ICC ESR-1347
NOTE: Nails are 10d by 1-1/2 inch joist hanger nails. Allowable loads are for hangers nailed into wood or structural composite lumber having an effective specific gravity of 0.55 (such as Southern Pine) or greater. Allowable uplift loads have been adjusted by a load duration factor C , of 1.6 (160%), D corresponding to the typical duration of wind and earthquake loads. Allowable gravity (bearing) loads have been adjusted by load duration factors, C , OF 1.0 D (100%), 1.15 (115%), and 1.25 (125%), corresponding to the typical durations of occupancy live loads, snow loads and construction loads, respectively. Tabulated loads are without 33% steel stress increase.

"Critical to the success of any design is the detailing and construction of it. We have been impressed with the Tamlyn Products for their complete system approach."

Brian Keith
Architect at JHP Architectural Designs, Dallas, TX

NEED HELP TO GET STARTED?

Contact us and our experienced sales representatives will help you get the information you need today.