Aluminum Soffit Vent
Item ID: CV416 / CV416W, CV616 / CV616W, CV816 / CV816W

Vent opening designed to keep out insects and weather while providing proper wall or under eave ventilation.

ITEM IDOVERALL SIZEAIRFLOW FACE SIZENFA*
CV416 / CV416W4"16"24
CV616 / CV616W6"16"39
CV816 / CV816W8"16"56

MATERIAL: 3105-type aluminum sheet with a minimum tensile strength of 29,000 psi, or equivalent, as referenced in AAMA 1482-86 (paragraph 3.2.3). The metal shall be treated on both sides with a non-chromate chemical conversion coating to ensure excellent paint adhesion and resistance to corrosion.
FINISH: All sizes in mill finish or white aluminum. CV816 Only - in galvanized steel
APPLICATION CONSIDERATIONS: Direct contact of aluminum product(s) with certain dissimilar materials or contact with the water run-off from such materials is likely to result in corrosion, which is not covered by the product warranty. Therefore, care should be exercised to avoid contact of aluminum with any corrosive materials during installation including, but not limited to: pretreated lumber, concrete, masonry cement, stucco, salt, corrosive chemicals, dissimilar metals (copper, zinc, steel, ect.).

"It is critical to the success of any design is the detailing and construction of it. We have been impressed with the Tamlyn Products for the complete system approach."

Brian Keith
Architect at JHP Architectural Designs, Dallas, TX

NEED HELP TO GET STARTED?

Contact us and our experienced sales representatives will help you get the information you need today.